Shop only for dealers and traders

Crystal Clear High Gloss

Crystal Clear High Gloss

Special blend of polyester polymers that produces a tack-free, non-wax high gloss finish —with chemical resistance, high impact strength and excellent colour and light stability—for composite plugs and patterns and wood product surfaces.

Usage

For composite plugs and patterns and wood product surfaces. Used by boat manufacturers as well as manufacturers of aircraft interiors, architectural woodwork, automotive wood dashboards, furniture and musical instruments. Also used for gelcoatrepair applications and for upgrading tooling gelcoats.

Features
  • Easy to apply
    The coatings build quickly and spray easily. You'll save time and labour.

  • High Gloss
    Sand and polish to a non-wax, tack-free high gloss finish.

  • Stability
    The coatings offer clarity (clear), colour (pigmented) and light stability.

  • Superior Finish
    The coatings produce a hard, chemical-resistant finish.

  • Custom Colours
    For volume applications, the coatings can be colour matched to customer requirements

Surface Primer

Surface Primer

The ultimate High-Gloss surface primer for wood, MDF, tooling board and composite plugs, patterns and models. Unique air-cure technology for fast cure even with thin coats. Easy to sand, polish to a gloss. Take a mould directly off the Surface Primer or topcoat for the highest gloss.

Recommended Uses:
  • Surface coat for plugs/ patterns for composite tooling.

  • Easy Sanding High-Build Primer for composite parts.

  • High Build, Fast Sanding Primer perfectly smooth surfaces

  • A substitute for sanding gelcoat - epoxy laminates or pinhole-free surfaces.

  • Highly crosslinked coating providing excellent chemical resistance

Features
  • Low Porosity
    Provides a super fine leveling and filling system. Applied properly, Surface Primer provides a porosity-free surface without pinholes or defects.

  • Adhesion to most epoxies
    With heat distortion level of 200° F/93 C the primer also adheres to fiberglass, wood, MDF, brick, concrete and polyurethane foam.

  • Rapid Buildup
    Up to 40 mils 1000 micorns, wet on wet, on composite plugs and master mold surfaces. Save time and labor.

  • Easy Sanding
    Also saves time and labor. The primer cures to a surface that polishes to a gloss.

Duratec Base Primer

Duratec Base Primer

The ultimate high-gloss surface primer for wood, MDF, foam and composite plugs, patterns and models.

Usage

For composite plugs and patterns and to prime a growing number of wood products—including furniture, musical instruments and architectural applications.

Features
  • All in one coat!
    Duratec Polyester Surfacing Primer provides rapid coat build up and a smooth surface with high gloss, when required.

  • Low porosity
    Provides a super fine leveling and filling system on a variety of substrates with superior release properties.

  • Adhesion to most epoxies
    With heat distortion level of 201°F, 94°C, the primer also adheres to fiberglass, properly prepared metal, wood, MDF, brick, concrete and polyurethane foam.

  • Rapid coat buildup
    To 40 mils, 1000 microns, wet on wet, on composite plugs and master mould surfaces; saves time and labour cost.

  • Easy sanding
    also saves time and labour. The primer cures to a surface that polishes to a high gloss, when required.

Product Properties

Gel Time: 16-18min

Vinyl Ester - Mould Repair Putty

Vinyl Ester - Mould Repair Putty

Easily applied, fast setting putty for repairing and finishing composite materials.

Usage

To repair and finish aerospace, aircraft, automotive and general GRP tooling and fabricated parts when there is a potential exposure to elevated temperatures up to 230°C, 446°F. The putty bonds to fibre glass, SMC, BMC, RIM, GRP, epoxy, graphite, and Kevlar composites. The cured putty can be finished by grinding and/or sanding to a feather edge

Features

Save time and build in strength with Duratec HHR Putty.

  • Easy to apply
    The smooth workable past goes on with a squeegee, spatula or flat tool.

  • Excellent adhesion properties
    Bonds strongly to a variety of substrates.

  • Takes all coatings
    Putty accepts virtually all types of coatings and decorative films without blush or discolouration.

  • Rapid coat buildup
    To 40 mils, 1000 microns, wet on wet, on composite plugs and master mould surfaces; saves time and labour cost.

  • Quick setting
    Ready for sanding in 20-30 min.

Product Properties
  • Viscosity: Thick paste

  • Thixotropic Index: 5+

  • Gel Time: 6-8 min

  • Sandable: 20 minutes

Inmold Primer

Duratec Inmold Primer

702-003 Black

707-002 Grey

707-082 Light Grey

714-002 White

The ultimate high-gloss surface primer for wood, MDF, foam and composite plugs, patterns and models.
Usage

For composite plugs and patterns and to prime a growing number of wood products - including furniture, musical instruments and architectural applications.

Features
  • All in one coat!
    Duratec Polyester Surfacing Primer provides rapid coatbuildup and a smooth surface with high gloss, when required.

  • Low porosity
    Provides a super fine leveling and filling system on a variety of substrates with superior release properties.

  • Adhesion to most epoxies
    with heat distortion level of 201°F, 94°C, the primer also adheres to fiberglass, properly prepared metal, wood, MDF, brick, concrete and polyurethane foam.

  • Rapid coat buildup
    To 40 mils, 1000 microns, wet on wet, on composite plugs and master mold surfaces; saves time and labor cost.

  • Easy sanding
    Also saves time and labor. The primer cures to a surface that polishes to a high gloss, when required.