One Stop Shop

Premium Products

Extensive Range

Expert Advice

Reliable Delivery

You Are Here: Main Section / Resin / Corrosion

BUFA Composites have a range of corrosion resistant resins where resistance to chemicals, oxidation and heat are required.

Vipel F010 Series


BUFA Composites Vipel F010 series bisphenol A, epoxy-based vinyl ester resins dissolved in styrene.



  • Wide formulating capabilities allow for use in many processes and for optimization of cost/performance.

Corrosion Resistance

  • Vipel F010 is highly resistant to hydrogen peroxide, and alkalis, and performs well in various stages of hypochlorite and chlorine production. Refer to BUFA Composites corrosion resistance information guide for corrosion resistance questions regarding suitability of a resin to any particular chemical environment contact BUFA Composites.

Food and Drug

  • Many resins in this datasheet are manufactured from raw materials that are listed in FDA regulations Title 21 CFR 177.2420. it’s the fabricator responsibility to ensure that the final composite is well cured. All composites used for FDA application should be cured at 180°F / 82°C for at least 4 hours. After post curing it should be washed with soap and water and rinsed. Please consult BUFA Composites regarding specific versions.

Vipel F085 Series
  • Epoxy Novolac

  • Polyester Resin

  • Corrosion Resistant, Epoxy Novolac

  • Vinyl Ester Resin


The Vipel F085 series is an epoxy novolac vinyl ester resin dissolved in styrene. F085 series is ideally suited for applications where outstanding mechanical properties and resistance to chemicals, oxidation and heat are required.


Corrosion Resistance

  • The epoxy novolac backbone chemistry provides resistance to acids and bases and has superior resistance to many organic solvents. The F085 series is generally resistant to liquids and vapors at higher temperatures than Standard bisphenol-A epoxy vinyl ester resins.

  • The F085 series is well suited for use in the field of chlorine-alkali electrolysis. Refer to BUFA Composites "Corrosion Resistant Resin Guide" for corrosion resistance information or for questions regarding suitability of a resin to any particularchemical environment, contact BUFA Composites.

Mechanical Properties

  • The F085 series is suitable for mouldings that are subjected to particularly High static and dynamic loads. It is resistant to internal stress cracking under high loading.



Pre accelerated thix medium viscosity



Chemical Resistant good cure