One Stop Shop

Premium Products

Extensive Range

Expert Advice

Reliable Delivery

You Are Here: Main Section / Resin / General Purpose
General Purpose

BUFA Composites provide a range of resins suitable for the Marine industry. This includes Lloyds Approved resins such as the Altek H520 series, Vinyl Esthers and DCPDs.

H520-NEA Series

Altek® H520 NEBB-14

General Purpose White Orthophthalic Laminating Resin Altek® H520 is a prepromoted, thixotropic, general purpose low reactive orthophthalic polyester resin.

Benefits
  • Low Exotherm
    The low exotherm of Altek H520 allows for the application of thick laminate sections that can cure at one time without the generation of excessive heat.

  • Good Secondary Bonding
    Altek H520 provides good chemical bonding between laminate application if proper application procedures are followed.

  • Superior Mechanical Properties
    When used with the proper glass reinforcement content, BUFA Composites Altek H520 produces a composite with superior mechanical properties that can assist in the reduction of cracking.

  • Catalyst Indicator Dye
    Resin colour changes from blue to neutral after addition of peroxide. This colour change provides a visual assurance to the fabricator that the peroxide has been mixed with the resin.

H432 AOEG

EcoTek® H432 AOEG (WAXED)

Polyethylene Terephthalate Modified Polyester Laminating Resin

EcoTek H432 is a prepromoted thixotropic, low reactive, Polyethylene Terephthalate modified polyester resin.

Application

BUFA Composites H432 Polyethylene Terephthalate resin was originally designed to be used in acrylic bonding applications and has become a good all round general purpose resin.

Features

H432 is produced from renewable bio-derived content and/or recycled content.

Benefits:
  • Low Styrene content

  • Superior processing - H432 was designed for quick wet out/roll out properties

  • Excellent adhesion to acrylic

AH520-NEA-14

AH520-NEA-14

Pre-acc medium viscosity thixed LSE Lloyds approved polyester resin thin-medium laminate colour change

AH520-NEB-14

AH520-NEB-14

Pre-acc medium viscosity thixed LSE polyester resin Lloyds approved thin-medium laminate White

AH432-AODG-14

AH432-AODG-14

EcoTek H432-AODG-14 is a renewable pre-promoted, thixotropic, general purpose, medium reactive PET polyester resin.

Synolite 5410

Synolite 5410

Synolite 5410-P-2 versatile Ortho resin for Hand lay-up and Spray-up processes with Low Styrene Emssion (LSE) system and fast gel time. The resin is particularly suited for Marine applications and is Lloyd's Register approved.

Synolite 5410-P-1 versatile Ortho resin for Hand lay-up and Spray-up processes with Low Styrene Emssion (LSE) system. The resin is particularly suited for Marine applications and is Lloyd's Register approved.

Synolite 5410-P-3 versatile Ortho resin for Hand lay-up and Spray-up processes with Low Styrene Emssion (LSE) system and fast gel time and through-Cure. The resin is particularly suited for Marine applications and is Lloyd's Register approved.

Synolite 5410 P-4 versatile Ortho resin for Hand lay-up and Spray-up processes with Low Styrene Emssion (LSE) system. The resin is particularly suited for industrial and drining water applications, and is WRAS approved.

H432-WZCG-14

H432-WZCG-14

Renewable Pre-acc medium viscosity thixed white LSE PET polyerster resin for genral purpose use.

Z999-ZKC

Z999-ZKC

Pre-acc medium viscosity thixed polyester non standard genral purpose resin for industrial use.

C577-ROL-20

C577-ROL-20

Pre-acc medium viscosity thixed pre filled economic costing general purpose polyester resin.

ECOLAM

ECOLAM

Pre -acc medium viscosity thixed pre filled economic lower costing general purpose polyester resin.

H8316-BZPG-25

H8316-BZPG-25

Pre-acc medium viscosity thixed polyester resin with good cure properties and low styrene content.

H8316-BZU-25

H8316-BZU-25

Pre-acc medium viscosity thixed polyester resin with good cure and UV properties with low styrene content.

H8316-BZB-14

H8316-BZB-14

Pre-acc medium viscosity thixed white polyester resin with good cure properties and low styrene content.

S 420

S 420

Class 2 (BS 476 Part 7), Clear, Preaccel

S 810

S 810

Class 1/O (BS 476 Parts 6 & 7) with & without 5000 gc

S 882

S 882

Class 1 (BS 476 Part 7), Sprayable

5001-T-1

5001-T-1

Cat 1a (BS 6853)**, Low smoke resin for Railways (LUL), Non-Accel

5001-W-2

5001-W-2

With 5000 gc meets IMO 2010 FTPC Parts 2 & 5, Prefilled

5015-N-1

5015-N-1

MgO thickenable, low smoke resin